M8503515
Cable routing
14
D3701510
Cable routing
Route the DIN cable for the CD changer up between the front air
duct (1) and the bulkhead stay (2)
Route the cable through the radio compartment
Clamp the cable to the stay. Use the clamp (3) from the kit
Route the cable above and along the front air duct to the seat
mounting member (4)
Clamp the cable to the existing cable harness (5).
15
D3702872
Continue to route the DIN cable under the carpet along the door
sills to the rear seat
Install the protective caps on the lugs (1) for the cable ducts.
16A
Illustration A applies to cars up to and including -2004 (CH
-389999)
Take the power supply cable for the CD-changer from the kit.
Connect the ground lead to the front ground terminal (1) in the
rear seat
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
© Volvo Car Corporation
CD changer 10 CD- 30730089 - V1.0
Page 9 / 17
