71
Group 21
Assembly, complete engine
92. Tighten the screws to ...............................
21 Nm
(15 lbf ft).
NOTE!
This does not apply to EDC 4 (electronic
governor).
Inlet pipes
93. Fit the inlet pipe with a new gasket.
Tighten the screws to ..........................
11
±1
Nm
(8.1 ±0.7 lbf ft).
Fitting of injectors / delivery pipes
94. Using a little high temperature paste (1161035), fit
a
new
copper gasket (
1
) on the injector and fit the
injector.
NOTE!
The connection for the fuel return line must be
towards the exhaust side.
95. Put the injector yokes (
1
) in place and tighten the
screws lightly.
Use Torx socket E10 (
2
).
