Boat in the water:
1 Remove the lock bolt (
A
). Loosen the adjuster bolt
(
B
) 1-2 turns.
2 With the engines running, turn the helm hard to one
side, until the helm pump reaches the stop position.
Both stern drives are then fully turned to one side.
3 Tighten the adjuster bolt (
B
), tightening torque
30
Nm
(22 lbf.ft) securely. Install the lock bolt (
A
).
This procedure ensures the stern drives are in par-
allel to one another (straight ahead).
Boat ashore:
1 Remove the lock bolt (
A
). Loosen the adjuster bolt
(
B
) 1-2 turns.
2 Align the stern drives in the desired direction
(straight ahead recommended)
3 Tighten the adjuster bolt (
B
), tightening torque
30
Nm
(22 lbf.ft) securely. Install the lock bolt (
A
).
Maintenance
47702599 12-2011
109
47702599 - Downloaded from www.volvopenta.com 23/11/2015 22:01:35