5
Instrumentation
Display mode Engine (Button 1)
This display mode shows the engine speed and boat
speed in the form of standard instruments. Opera-
tion time is shown in the lower window. The fuel level
gauge is only displayed if there is a tank sender.
The scale values for maximum engine speed and
maximum speed can be set in the configuration
menu.
Only metric values are displayed, but other units can
be displayed if they have been chosen in the configu-
ration menu.
If information about boat speed is not available, the
display shows coolant temperature instead.
System
The SYSTEM menu is to give necessary functions
and information to service technicians.
-
Demo: Switch between demo mode ON/OFF. The
display is in normal operating mode when demo
is OFF.
-
Com Viewer: Shows the latest messages recei-
ved on the communication inputs
-
Prog tx: Transfers the content of the application
program on flash memory to other CANtrak-units
on the same CANbus-link
-
About: Shows the following information:
ID-no: Display serial number
Eeprom: No. of writes to the EEPROM
Vers: Software version number
Chk: Flash memory checksum
Part no: Volvo’s part number for the software
Source: Shows the source of the received
data
Label: Label allocated on the bus. Each unit
on the same bus must have its own unique
label