
Flooded Engine
GL Models
21181
21183-1
To clear a flooded engine:
1.
Disengage the shift mechanism by pressing gear
shift release
A
.
2.
Move the remote control lever to FULL THROT-
TLE
B
.
3.
Turn the key switch to START
II
.
4.
As soon as the engine starts:
• Return the remote control handle to IDLE.
• Turn the key to ON or RUN
I
.
• Move the remote control handle to FAST
IDLE to warm up the engine. Do not exceed
1000 RPM.
NOTICE!
Immediately after engine start-up, look at all
instruments. If any readings are abnormal, stop the
engine and determine the cause.
Fuel Injected Models
To clear a flooded engine:
1.
Advance the remote control lever to the FULL
THROTTLE
B
position.
NOTICE!
Be prepared to quickly move the control
handle to IDLE once the engine starts. This will
avoid over-speeding and possibly damaging the
engine.
2.
Turn the ignition switch to START
II
. If the engine
does not start, then try again.
In this throttle position, with the engine speed
below 400 RPM (cranking speed), the ECM shuts
off the fuel injectors so no fuel is delivered.
3.
Move the throttle back to the neutral position to
return to normal operating mode.
NOTICE!
Immediately after engine start-up, look at all
instruments. If any readings are abnormal, stop the
engine and determine the cause.
Starting
47700385 05-2009
29
Summary of Contents for 3.0GLP-J
Page 1: ...OPERATOR S MANUAL 3 0L 4 3L 5 0L 5 7L 8 1L SX A DPS A ...
Page 124: ......
Page 128: ......
Page 129: ......