VOLTOMAT HEATING QH-104263.3, Instruction Manual

Page: 62 / 131

- 61 -
22. Keep safe distances according to European standards
and national regulations indicated in Fig. 1.
23. The heater may only be connected to compact installed
lines of at least 1,0 mm².
24. After installation, the connection cable must not touch
the appliance.
25. Do not use if the connection cable or the heater is
damaged or the heater is defective.
26. Do not cover with clothes to be dried.
27. Do not place the connection cable or the pull switch on
or around the hot heater.
28. After switching the heater off, please observe that it
remains hot for some time.
29. Keep electrical appliances out of the reach of children or
disabled persons. Do not let them use the appliances
without supervision.
30. The quartz heater must be mounted to the wall in
horizontal position by a skilled worker.
31. Keep the appliance and its cord out of reach of children
less than 8 years.
32. Do not use this heater with a programmer, timer,
separate remote-control system or any other device that
switches the heater on automatically. Since a fire risk
exists if the heater is covered or positioned incorrectly.
33. To clean the radiant (reflector) part, use a slightly damp,
soft cloth; do not use metal scouring pads or abrasive
products, water or other liquids; do not immerse in
water or other liquids.
34. WARNING: In order to avoid overheating, do not cover
the heater.
35. This heating device is not suitable for assembling in
vehicles and machines.
36. Regarding the information for the installation, please
refer to the below paragraph of the manual.
These instructions for use belong to the appliance and
must be kept in a safe place. When changing owners,
these instructions must be handed over to the new
owner!