43 (48)
ENG
e) Do not use damaged or modified bat-
teries.
Damaged or modified batteries may
behave unexpectedly and cause fires, explo-
sions or pose a risk of injury.
f) Do not expose a battery to fire or exces-
sively high temperatures.
Fire or tempera-
tures in excess of 130°C (265°F) can cause an
explosion.
g) Follow all instructions regarding char-
ging and never charge the battery or the
cordless tool outside of the temperature
range given in the operating instructions.
Incorrect charging or charging outside of the
permissible temperature range can destroy
the battery and increase the risk of fire.
Safety guidelines for chargers
This appliance may be used
by children aged 8 years and
above and by persons with
limited physical, sensory or
mental capabilities or lack of
experience and knowledge,
provided that they are un-
der supervision or have been
told how to use the appliance
safely and are aware of the
potential risks. Do not allow
children to use the appliance
as a plaything. Cleaning and
user maintenance tasks may
not be carried out by children
unless they are supervised.
The charger is
suitable for indoor
use
only.
CAUTION!
RISK OF EXPLOSION!
Never charge non-rechargeable
batteries.
Protect the rechargeable battery
from heat (for example, from
continuous exposure to sunlight),
fire, water and moisture.
There is
a risk of explosion.
To avoid potential risks, if the mains cable
of this appliance is damaged, it must be re-
placed by the manufacturer, or its customer
service department or a similarly qualified
person.
WARNING!
Service
a) Have your power tool serviced by a
qualified repair person using only identical
replacement parts.
This will ensure that the
safety of the power tool is maintained.
b) Never try to repair damaged batteries.
Battery maintenance should only be carried
out by the manufacturer or an approved
customer service centre.
Use ear protection, eye protection, dust pro-
tective face mask and gloves.
General instructions for jigsaws
Before each use, check that the power
switch is working properly and returns to the
off position when released.
Applying a larger pressure does not mean an
increased sawing capacity, but only increases
the wear on the machine and the tool.
Use undamaged saw blades that are suitable
for the current task.
Check for foreign objects such as nails or
screws in the workpiece. In these cases a
special saw blade must be used.
Immediately release the switch if the saw
blade jams or gets stuck. Widen the cut with
a suitable tool and pull out the saw blade.
Summary of Contents for 7330027147888
Page 48: ......
