IMPORTANT CONSIDERATIONS BEFORE INSTALLING
© Voltex Electrical 2016. All Rights Reserved.
®
A few minutes planning can make a big difference to the installation time and to
your satisfaction with the function of the appliance.
1.
For the exhaust fan to work efficientl
y
, replacement air of a volume
equivalent to what is being extracted must be able to enter the room. In
general, this air would be drawn under the door, or through a slightly open
window. If the room is airtight, the fan will function poorly.
2.
This appliance is designed for installation in flat ceilings ON
L
Y. Do not
mount it on a sloping ceiling or a vertical wall.
3.
Before commencing any cutting, check that there are no obstructions
such as ceiling joists and that there is sufficient height clearance or the
housing and routing of the duct. Check that the electrical wiring can be
routed from the wall switches to the mounting location.
7.
If the supply cord is damaged, it must be replaced by your local electrician
or similarly qualified pe son in order to avoid a hazard.
8.
This appliance is designed for indoor use only.
9.
Do not allow any foreign object to enter through the facia opening or outlet
as this may damage the appliance and/or the user.
10.
The appliance shall, under no circumstances, be covered with insulating
material or similar material.
11.
Make sure that the power is OFF before installation.
12.
When cutting into the mounting surface, do not damage electrical wiring
and other hidden utilities.
13.
The appliance must be properly connected to the protective earthing
conductor in the fi
x
ed wiring of the installation.
14.
Precautions must be taken to avoid the back-fl
o
w of gases into the room
from the open flue of gas or other fuel-burning appliances
15.
FOR SAFE USE OF THIS APPLIANCE, AFTER INSTALLATION, DISCONNECTION
OF THE APPLIANCE FROM THE SUPPLY SHALL BE POSSIBLE. THIS
MAY BE ACHIEVED BY HAVING THE PLUG ACCESSIBLE OR MEANS FOR
ALL POLE DISCONNECTION MUST BE INCORPORATED IN THE FIXED WIRING
IN ACCORDANCE WITH THE WIRING RULES.
