Volter BEACH-set Ioperating Instructions For The Accessory Download Page 1

Page: 1 / 4

OPERATING INSTRUCTIONS FOR THE ACCESSORY

BEACH-set

TO THE PRODUCT xRover

Thank you for purchasing the BEACH-set accessory for the xRover REHA cart and we

believe that it will serve you for a long time.

XRover cart - with the BEACH-set accessory can be used to transport people on sandy

terrain (beach / desert).

The xRover REHA product complies within the following standards:

CSN EN 1888: 2012 - as a pram

CSN EN 15918: 2013 - as a cart behind a wheel
CSN EN 12189: 2014 - as a wheelchair.

Technical parameters:

rear wheel diameter: 19 ″ / 49 cm

width of the rear wheel: 22 cm

front wheel diameter: 11 ″ / 28

front wheel width: 18 cm

recommended wheel inflation pressure: 0.6 KPa

weight of BEACH set including transport bag: 10.5 kg

ATTENTION!

Please read these operating instructions

carefully before using the BEACH-set with the

xRover REHA:

Summary of Contents for BEACH-set

Page 1: ...he xRover REHA product complies within the following standards CSN EN 1888 2012 as a pram CSN EN 15918 2013 as a cart behind a wheel CSN EN 12189 2014 as a wheelchair Technical parameters rear wheel d...

Page 2: ...ag with the axle facing up The second rear wheel is placed on it with the axle down always so that the axles hide in the recesses at the centre of the opposite wheel ATTENTION It is essential to follo...

Page 3: ...smantled in the reverse order ATTENTION We never put on a BEACH set with a person sitting in xRover Accident may result in possible overturning of the cart Now we put on the front wheel with a fork Re...

Page 4: ...It is performed under running water using common non abrasive cleaning agents Never use thinner benzine toluene or other chemicals for cleaning Wheel oil or equivalent can be used to lubricate the whe...