3
The wheel is assembled
in the same way as with a normal xRover wheel. Grasp the inner ring
of the wheel firmly with your fingers and press the black button in the middle of the wheel with
your thumbs.
At the end of the axle, you can see the balls locking the wheel on the xRover. Insert the axle into
the axle hole as far as it will go and release the black knob. By pulling on the wheel, we make
sure that it sits firmly on the wheelchair. We proceed in the same way when deploying the
second wheel. The wheels are dismantled in the reverse order.
ATTENTION!
We never put on a BEACH-set with a person sitting in
xRover! Accident may result in possible overturning of
the cart
Now we put on the front wheel with a fork.
Release the flaps on the front axle and insert the fork inside, as in the case of mounting a 14 ″
jogging wheel.
ATTENTION!
The screw must fit exactly into the
cut-out in the sleeve, otherwise the
sleeve will be damaged and the front
axle will be damaged!
Thus, the fork is inserted into the sleeve with a locking screw on
the fork mandrel pointing upwards.
Insert the fork as far as it will go and
tighten the flaps on the sleeve firmly.
The Xrover with BEACH set is now ready for use.
Disassemble the fork in reverse order.
