Please read these instructions before attempting to operate the product.
WARNING
: To prevent fire or shock hazard, do not expose the Receiver / Power
Supplies to rain or moisture.
CAUTION: RISK OF ELECTRIC SHOCK:
Do not remove the cover from the power
supply. There are no user serviceable parts inside. Refer servicing to qualified
service personnel.
SAFETY FIRST
Page 1
INSTALLATION
Unpack the Receiver.
Please follow one of the relivent connection methords;
CONNECTION METHORD 1 CONNECTING TO A TV
CONNECTING RECEIVER
The Receiver connection is now complete
.
NO TUNING is required, simply select the AV channel on your TV to view the
camera picture. If your not sure how to select the AV channel on your TV you
will need to look up selecting the AV channel in your TV installation instruc-
tions.
Page 6
TROUBLESHOOTING
If you are having trouble operating this product, please consult the guide below. If
you still encounter problems then please contact the Voltek helpline on
09066 191 133*
REMEDY
1. Check all connectors and check that the power is
switched on to your receiver and to the camera/
transmitter.
2. Ensure the camera and receiver are set to the correct
channel refer to page 5 for more details.
3. Check the transmitter/camera is within range of the
receiver.
4. Check camera is switched on and the red power on LED
is lit on the camera.
1. Check the receiver is switched on,
2. Check the power adaptor is plugged in an turned on at the
Mains outlet.
3. Check that the TV or VCR is on the correct AV Channel.
1. Check that each transmitter and receiver is within range
and that no large obstructions are blocking the signal,
2. Try repositioning the camera/transmitter or the
receiver to improve the reception quality.
3. If a transmitter is positioned close to the receiver, point the
antenna away from the receiver.
4. Check the lead has been unbundled
5. Check that the lead is not running along side any other
cables.
6. Check if there is any other equipment transmitting on the
2.4GHz frequency nearby.
1. Check that you have a light illuminating the area. (Street
lights
may not be adequate)
2. Check the camera is not pointing at a light.
1. Ensure the volume is turned up sufficiently on the TV.
2. Make sure the sound is within the microphone range.
3. If the unit emits a loud wailing sound try moving the camera
away from the TV.
SYMPTOM
No camera picture
Blank Picture
Interference on the
camera picture
Poor picture at
night.
Audio problems