5
3) Record
Choose
Record
to enter the following interface.
Then choose
Quality
to set up the quality of picture to be 320*240 or
640*480.
Using the lower resolution means you will get longer recording time as less
storage space is used. Press ok on the desired setting and the unit will store
this and exit back to the record setting menu.
Choose
Trigger Record
to set the recording duration, which can be 15 or 30
seconds after last trigger. Press ok on the desired recording duration and the
unit will store this and exit back to the record setting menu.
Choose
Timer Record
to adjust the start and end time of the timer recording.
Use the left and right cursor key to choose the item and then the up and down
key to adjust the highlighted value. Once the desired times are set navigate the
cursor to the ON / OFF tab and then press ok the unit will store this and exit
back to the record setting menu.
When there is a new recording, the LED marked with NEW on the left side of monitor will illuminate. These can
be viewed by using the Playback function. When the selected storage device is full, the LED marked FULL will
illuminate. If this happens you can either change the SD card or delete the non-required files.
