N. Specifications
Model
BC-1240P-1AP
Output
Output (Charge) Voltage Selections
Absorption
Float
WET
14.4V
13.5V
LiFePO4
14.6V
13.6V
AGM
14.3V
13.2V
GEL 1
14.1V
13.7V
GEL 2
14.3V
13.8V
CALCIUM
15.1V
13.8V
User Define 1
12V - 16V
User Define 2
12V - 16V
Equalization
15.5V
Maximum Output Charging Current (Continuous)
40A
Recommended Battery Capacity Range
15 – 400AH
Soft Start Bulk Charge
Battery Voltage to Trigger (cut-in) Soft Start
Bulk Charge Mode
<12.3V
Soft Start Bulk Charge Current (Current Limit)
1/2 of the charging current
Ripple and Noise (Peak to Peak)
<200mV
Efficiency at Maximum Power (230V)
>83%
Dual Bank Charging (Battery must be of same type)
Yes
Input
AC Voltage Range
200 – 240V 50Hz~
AC Current at Full Load (230V)
3.5A
Protection
Overload
90-110% Rated Output Current or 50% Rated Output Current (Soft Charge)
Protection Type: Constant Current Limiting, recovers Automatically after
Fault Condition is Removed.
Short Circuit
Recovers Automatically if Fault Condition is Removed within 20 seconds
Otherwise the charger will shutdown until re-start the charger again
Reverse Polarity
Car Blade Fuse
Over Temperature
Protection Type: Shut Down
OVP Output Over Voltage
Yes
Cooling
Cooling Method
Thermostatic, Variable Speed Fan
Indicators
4-Stage Battery Charger
Yes
Charge Phase Bulk / Absorption / Float
Yes
Fault Mode
Yes
Over Temp
Yes
Charger ON
Yes
Fuses
AC Fuses at IEC AC Power Socket
T4A slow blow
DC Car Blade Fuse at Front Panel
30Ax2
Accessories
Supplied Accessories
Remote Temperature sensor, ac cable, spare ac fuse at socket, one set of
50 Amp Grey Connector Kit.
Optional Accessory
Remote Control Panel (Model:HBR-3100)
Approvals
Safety :
CE: EN 60335
SAA: AS/NZS 60335.1, AS/NZS 60335.2.29
(Include clause 21.102 : vibration Test)
Yes
EMC: CE EN 55014; EMF: EN50366
Yes
Others
Dimensions and Weight
200x80x260mm ; 3.2kg
Remarks
All values are based on the standard ambient temperature 25°C and pressure 0.1Mpa.
