Voltage Reducer Mode (Step Down Converter):
1. Set all the DIP switches to down position , check LED B and LED C are both
off to confirm unit becomes a Voltage Reducer with 13.8V & 40A output.
2. Double check for correct polarity on the input and output before
connections are made.
Any wrong polarity on the input or output connection will damage unit.
3. Unit can be set to Automatic car ignition control or manual remote on-off via
the Ignition terminal as the back of the unit.
For continuous operation short circuit the Ignition terminal
.
4. All the protections of the unit are applicable in this mode as in charger mode.
