Operating Elements
2.4A
USB-C PD
1
2
3
4
1 Power plug
2 USB-C™ PD port
3 LED power indicator
4 USB-A port
Operation
• Insert the power plug
(1)
into the 12-24V car power socket.
• The charger will receive power after the car ignition switch is turned on.
• The LED power indicator
(3)
will light when the charger is receiving power.
• Connect your device to a charging port
(2)
or
(4)
.
• Charging will begin automatically, and the connected device will indicate the charging status.
• Disconnect the charger from car power socket when not in use.
Care and Cleaning
• Disconnect from the power supply before each cleaning.
• Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as
they can cause damage to the housing and malfunctioning.
•
Clean the product with a dry, fibre-free cloth.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the
household waste. At the end of its service life, dispose of the product in accordance
with applicable regulatory guidelines. You thus fulfill your statutory obligations and
contribute to the protection of the environment.
Technical Data
Input voltage / current ................... 12 - 24 V/DC, 2.9 A max.
Output voltage / current ................ USB-C™ PD (power delivery):
5 V/DC 3 A; 9 V/DC 2 A; 12 V/DC 1.5 A
USB-A: 5 V/DC 2.4 A
Output power ................................ max. 30 W (total)
USB-C™:
max. output 18 W
USB-A: max. output 12 W
Cable ............................................ USB-C™ 2.0 (male to male) approx. 1 m
Protection ..................................... Short circuit, over current
Operating conditions ..................... 0 to 35 °C, 10 – 95% RH (non-condensing)
Storage conditions ........................ -10 to 55 °C, 5 – 95% RH (non-condensing)
Dimensions (ø x L) ....................... 28 x 65 mm
Weight .......................................... 33 g
Operating Instructions
VC-30CC-PD USB Vehicle Charger
Item No. 2176098
Intended Use
The product is intended to be used as a USB charger that connects to the power socket in
your vehicle. It has USB-C™ PD and USB-A ports that can deliver a maximum output of
30W. Integrated short circuit and over current protection keeps connected devices safe
during charging. The USB-A port is equipped with a charging controller to optimize charging
performance. Both ports can be used for charging at the same time.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture must be avoided
under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged. In
addition, improper use can result in other hazards. Read the instructions carefully and store
them in a safe place. Make this product available to third parties only together with its operating
instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery Content
• Car Charger
• USB-C™ cable
• Operating instructions
Up-to-Date Operating Instructions
Download the latest operating instructions at www.conrad.com/downloads or
scan the QR code shown. Follow the instructions on the website.
Explanation of Symbols
The symbol with the exclamation mark in the triangle is used to indicate important
information in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on operation.
Safety Instructions
Read the operating instructions
carefully and especially
observe the safety information.
If you do not follow the safety
instructions and information on
proper handling in this manual,
we assume no liability for any
resulting personal injury or
damage to property. Such cases
will invalidate the warranty/
guarantee.
a) General Information
• The device is not a toy. Keep it out of the
reach of children and pets.
• Do not leave packaging material lying
around carelessly. This may become
dangerous playing material for children.
• Protect the appliance from extreme
temperatures, direct sunlight, strong jolts,
high humidity, moisture, flammable gases,
steam and solvents.
• Do not place the product under any
mechanical stress.
• If it is no longer possible to operate the
product safely, take it out of operation and
protect it from any accidental use. Safe
operation can no longer be guaranteed if
the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in
poor ambient conditions or
- has been subjected to any serious
transport-related stresses.
• Please handle the product carefully. Jolts,
impacts or a fall even from a low height can
damage the product.
• For safety reasons, do not use the car
adapter during thunder storms.
• Do not make any adjustment on the
product when driving or in other situations
where distractions can be hazardous.
Responsible and safe driving is your
primary responsibility when operating a
vehicle.
• Consult an expert when in doubt about
the operation, safety or connection of the
appliance.
•
Maintenance, modifications and repairs
must only be completed by a technician or
an authorised repair centre.
• If you have questions which remain
unanswered by these operating
instructions, contact our technical support
service or other technical personnel.
b) Charger
• Do not short circuit the output terminals.
• Make sure the total loading of connected
devices does not exceed the rated output
of this USB charger.
• Connect the charger before turning on the
car ignition switch.
• It is recommended to use the included
cable or the cable supplied with your
device.
c) Connected Devices
• Also observe the safety and operating
instructions of any other devices which are
connected to the product.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights
including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represent the technical status at the time of printing.
Copyright 2020 by Conrad Electronic SE.
*2176098_v1_0120_02_dh_m_en
