VOLTCRAFT V-CHARGE 100 DUO, Operating Instructions Manual

Page: 108 / 236

108
16. System Settings
The system settings of the charger summarise various basic settings. They are pre-applied with
the most common values in the delivery condition.
Depending on the rechargeable batteries you want to charge or discharge, however, certain
changes to the values are sensible.
Proceed as follows:
• Select the function "SYSTEM SET ->" in the main menu
of the charger with the button "INC" or "DEC".
• Confirm the selection by pressing the "START/ENTER"
button.
First, the break time between a charging/discharging
process (e.g. in cycle operation) is displayed; see figure
on the right.
Use the buttons "INC" or "DEC" to select the desired setting functions.
If a setting is to be changed, briefly push the button "START/ENTER". The respec -
tively adjustable value flashes.
Change the flashing value with the buttons "INC" and "DEC". Keep the respective
button pressed for quick adjustment.
Complete the setting by briefly pushing the "START/ENTER" button. The respective
adjustable value stops flashing. Then you can select another setting function, see
above.
To return to the main menu, push the button "BATT. TYPE/STOP".
Observe the following information for description of the possible setting functions.
Pause duration between charging/discharging processes
When charging a rechargeable battery, it heats up (depending on the charging current). In cycle
operation, the charger may make a break between charging and discharging so that the re-
chargeable battery cools off before discharging starts.
Rest Time
CHG>DCHG 10Min
PROGRAM SELECT
SYSTEM SET->
Rest Time
CHG>DCHG 10Min