2
Operating Instructions
UC-2ACX002 USB Charger 63 W
Item no: 2348948
1 Intended use
The product is a USB charger that supports power delivery (quick charge) technology.
The product is intended for indoor use only. Do not use it outdoors.
Contact with moisture must be avoided under all circumstances.
If you use the product for purposes other than those described, the product may be damaged.
Improper use can result in short circuits, fires, electric shocks or other hazards.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product available to
third parties only together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights reserved.
2 Delivery contents
■
Product
■
Operating instructions
3 Latest product information
Download the latest product information at
www.conrad.com/downloads
or scan the QR code shown. Fol-
low the instructions on the website.
4 Description of symbols
The symbol with the exclamation mark in the triangle is used to indicate important informa-
tion in this document. Always read this information carefully.
Protection class 2 (double or reinforced insulation, protective insulation).
This product must only be used in dry, enclosed indoor areas. It must not become damp or
wet.
5 Safety instructions
Read the operating instructions carefully and especially observe the safety informa-
tion. If you do not follow the safety instructions and information on proper handling,
we assume no liability for any resulting personal injury or damage to property. Such
cases will invalidate the warranty/guarantee.
5.1 General
■
The product is not a toy. Keep it out of the reach of children and pets.
■
Do not leave packaging material lying around carelessly. This may become dangerous playing mater-
ial for children.
■
If you have questions which remain unanswered by this information product, contact our technical
support service or other technical personnel.
5.2 Handling
■
If it is no longer possible to operate the product safely, take it out of operation and protect it from any
accidental use. Safe operation can no longer be guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.
■
Handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.
■
Consult an expert when in doubt about the operation, safety or connection of the appliance.
5.3 Operating environment
■
Do not place the product under any mechanical stress.
■
Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam and solvents.
■
Protect the product from high humidity and moisture.
■
Protect the product from direct sunlight.
■
Do not switch the product on after it has been taken from a cold to a warm environment. The con-
densation that forms might destroy the product. Allow the product to reach room temperature before
you use it.
5.4 Connected devices
■
Also observe the safety and operating instructions of any other devices which are connected to the
product.
5.5 Power adapter
Do not tamper with power supply components. Risk of death by electric shock!
■
Always ensure proper connection.
■
Never use damaged power supply components.
■
Do not modify power supply components.
■
Connect the appliance to a wall socket that can be accessed easily.
■
As power supply, only use the supplied mains adaptor.
■
Only connect the power adaptor to a normal mains socket connected to the public supply. Before
plugging in the power adaptor, check whether the voltage stated on the power adaptor complies with
the voltage of your electricity supplier.
■
Never connect or disconnect power adaptors if your hands are wet.
■
Never unplug the power adaptor from the mains socket by pulling on the cable; always use the grips
on the plug.
■
For safety reasons, disconnect the power adaptor from the mains socket during storms.
■
Do not touch the power adapter if there are any signs of damage, as this may cause a fatal electric
shock! Take the following steps:
– Switch off the mains voltage to the socket containing the power adapter (switch off the correspond-
ing circuit breaker or remove the safety fuse, and then switch off the corresponding RCD protective
switch).
– Unplug the power adapter from the mains socket.
– Use a new power adapter of the same design. Do not use the damaged adapter again.
6 Cleaning
Important:
– Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions. They damage
the housing and can cause the product to malfunction.
– Do not immerse the product in water.
1. Disconnect the product from the power supply.
2. Let the product cool down to ambient temperature.
3. Clean the product with a dry, fibre-free cloth.
7 Disposal
Electronic devices are recyclable waste and must not be disposed of in the household waste.
At the end of its service life, dispose of the product in accordance with applicable regulatory
guidelines.
You thus fulfill your statutory obligations and contribute to the protection of the environment.
8 Technical data
8.1 General
Protection class .....................................
II
USB port protection ...............................
Short circuit, over current
Operating conditions..............................
0 to +40 °C, 10 – 90 % RH (non-condensing)
Storage conditions.................................
-25 to +70 °C, 10 – 90 % RH (non-condensing)
Product dimensions (WxHxD) (approx.) 31 x 98 x 72 mm
Weight (approx.) ...................................
172 g
8.2 Power supply
Input voltage .........................................
100 - 240 V/AC
Input AC frequency ...............................
50 / 60 Hz
USB-C
TM
output .....................................
Max. 45.0 W; 5.0 V/DC 3.0 A, 9.0 V/DC 30 A, 12.0 V/DC 3.0
A, 15.0 V/DC 3.0 A, 20.0 V/DC 2.25 A
USB-A output.........................................
Max. 18.0 W ; 3.6 - 6.5 V/DC 3.0 A, 6.0 - 9.0 V/DC 2.0 A, 9.0 -
12.0 V/DC 1.5 A
Total output............................................
(USB- A: max. 18 W) + (USB-C
TM
max. 45 W) = max. 63 W
Input voltage 230 V/AC 50 Hz
Input voltage 115 V/AC 60 Hz
USB type-C
TM
: Nil
USB type-A: 5 V 3 A
USB type-C
TM
: 5V
3A
USB type-A: --
USB type-C
TM
: --
USB type-A: 5V
3A
USB type-C
TM
: 5
V 3 A
USB type-A out-
put: --
Average active
efficiency
81.7 %
81.5 %
81.5 %
82.5 %
Efficiency at
low load (10
%)
73.8 %
79.0 %
74.1 %
78.5 %
No load condi-
tion consump-
tion
0.30 W
0.30 W
0.30 W
0.30 W
Model identifier
UC-2ACX002
Manufacturer
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau
Commercial registration number
HRB3896
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in
electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE.
*2348948_V1_0921_dh_mh_en
I1/O1
