OPERATING INSTRUcTIONS
VERSION 10/12
SMP-36 IN-cAR ADAPTOR FOR SMALL APPLIANcES
ITEM NO.: 51 53 01
INTENDED USE
This product allows the operation of low-voltage consumers. It includes a USB output, seven adjustable
output voltages and seven output plugs. Power is supplied by an in-car cigarette lighter socket. The product
features short-circuit and overload protection.
For safety and approval purposes (CE), you must not rebuild and/or modify this product. If you use the
product for purposes other than those described above, the product may be damaged. In addition, improper
use can cause hazards such as short circuiting, fire, electric shock etc. Read the instructions carefully and
keep them. Make this product available to third parties only together with its operating instructions.
DELIVERy cONTENT
Adaptor
•
7 x output plugs
•
Voltage setting key
•
Operating instructions
•
SAFETy INSTRUcTIONS
Read the operating instructions carefully and especially observe the safety information.
If you do not follow the safety instructions and information on proper handling in this
manual, we assume no liability for any resulting personal injury or damage to property.
Such cases will invalidate the warranty/guarantee.
Persons / Product
a)
The device generates heat during operation. Ensure adequate ventilation and do not cover the
•
housing during operation.
The device is not a toy. Keep it out of the reach of children and pets.
•
Do not leave packaging material lying around carelessly. These may become dangerous
•
playing material for children.
Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity,
•
moisture, flammable gases, vapours and solvents.
Do not place the product under any mechanical stress.
•
If it is no longer possible to operate the product safely, take it out of operation and protect it from
•
any accidental use. Safe operation can no longer be guaranteed if the product:
is visibly damaged,
-
is no longer working properly,
-
has been stored for extended periods in poor ambient conditions or
-
has been subjected to any serious transport-related stresses.
-
Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage
•
the product.
Also observe the safety and operating instructions of any other devices which are connected
•
to the product.
Miscellaneous
b)
Consult an expert when in doubt about operation, safety or connection of the device.
•
Maintenance, modifications and repairs are to be performed exclusively by an expert or at a
•
qualified shop.
If you are not sure about the correct connection or use, or if questions arise which are not covered by
these operating instructions, please do not hesitate to contact our technical support or another qualified
specialist.
Voltcraft®, Lindenweg 15, D-92242 Hirschau, Tel. +49 180/586 582 7.
Legal notice
These operating instructions are a publication by Voltcraft®, Lindenweg 15, D-92242 Hirschau/Germany, Phone +49 180/586 582 7
(www.voltcraft.de).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data processing
systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
These operating instructions represent the technical status at the time of printing. Changes in technology and equipment reserved.
© copyright 2012 by Voltcraft®
OUTPUT PLUG SPEcIFIcATIONS
Plugs
Ø outer
Ø inner
Application (example)
2.35 mm
0.75 mm
Digital camera
3.5 mm
1.35 mm
Navigation unit
4.0 mm
1.7 mm
Playstation Portable®, mobile
DVD player, digital camera
4.75 mm
1.75 mm
Mobile DVD player, digital
camera
5.5 mm
2.1 mm
TFT monitor
5.5 mm
2.5 mm
TFT monitor
miniUSB
Navigation unit, MP3 / MP4
player
OPERATION
Always turn off the electrical load before plugging / unplugging the in-car adaptor to the
product. Ensure it is correctly connected. If the product is connected improperly, it may
heat up or cause electric shocks, fire, etc.
The total consumption of the devices connected must not be higher than 3 A.
Use the key to set the required voltage.
1.
Connect a low-voltage consumer to the product using one of the output plugs or the USB port. The arrow
2.
icons on the output plug and socket must face each other, to show that the inner contact is positive and
the outer negative.
Unfold the in-car plug and insert it into the cigarette lighter socket of a vehicle. The white LED on the USB
3.
port indicates it is ready to operate.
After use, disconnect the product from the power supply.
4.
You can operate the adaptor with the engine running or switched off. However, do not start the engine
while the adaptor is in operation, since the power supply to the cigarette lighter outlet is interrupted
during ignition. When operating the adaptor at a high load for a long time, it is advisable to start the
engine in order to recharge the vehicle battery.
FUSE REPLAcEMENT
There is one safety fuse built into the in-car adaptor. To replace the fuse:
Unplug the in-car adaptor from the cigarette lighter socket and disconnect it from all devices.
1.
Unscrew the cap on the top of the in-car plug. Pull out the broken fuse and replace with a new one of the
2.
same type (250 V, 5 A).
Close the fuse compartment.
3.
DISPOSAL
Electronic devices are recyclable waste and must not be disposed of in the household waste.
At the end of its service life, dispose of the product according to the relevant statutory
regulations.
TEchNIcAL DATA
Input voltage ......................................... 12 – 13.8 V/DC
Output voltage ...................................... 3/4.5/5/6/7.5/9.5/12 V/DC
Output current ....................................... 3 A max.
USB output ........................................... 5 V/DC, 1000 mA
Plug Ø in mm (outer/inner) ................... 2.35/0.75; 3.5/1.35; 4.0/1.7; 4.75/1.75; 5.5/2.1; 5.5/2.5
Cable length ......................................... 1.8 m
Dimensions (W x H x D) ....................... 76 x 80 x 33 mm
Weight .................................................. 163 g
