Quick Guide
4
you can turn the
M
knob to select the menu or set the value. You can push it to close
the menu on the left and right.
User Interface Introduction
1
3
10
19
14
27
24
8
9
11
12
16
17
20
21
22
26
28
7
18
25
2
4
6
23
13
15
6
5
1.
Waveform Display Area.
2.
Run/Stop (touchable)
3.
The state of trigger, including:
Auto: Automatic mode and acquire waveform without triggering.
Trig: Trigger detected and acquire waveform.
Ready: Pre-triggered data captured and ready for a trigger.
Scan: Capture and display the waveform continuously.
Stop: Data acquisition stopped.
4.
Click to show/hide the touchable menu pane.
5.
Turn on/off the magnifier function.
6.
The two blue dotted lines indicates the vertical position of cursor measurement.
7.
The T pointer indicates the horizontal position for the trigger.
8.
The pointer indicates the trigger position in the record length.
9.
It shows present triggering value and displays the site of present window in
internal memory.
10.
Touchable icon is to enable (
) or disable (
) the touchscreen controls.
