Quick Guide
2
Rear Panel
3
9
8
7
11
10
1
2
6
4
5
1.
Handle
2.
Air vents
3.
Input terminals of
optional
multimeter
4.
AC power input jack
5.
Fuse
6.
Foot stool
: Adjust the tilt angle of the oscilloscope.
7.
LAN port
: the network port which can be used to connect with PC.
8.
USB Device port:
It is used to transfer data when external USB equipment connects to
the oscilloscope regarded as "slave device". For example: to use this port when
connect PC to the oscilloscope by USB.
9.
Lock Hole
: You can lock the oscilloscope to a fixed location using the security lock
(please buy it yourself) to secure the oscilloscope.
10.
Trig Out(P/F)
port: Trigger signal output or Pass/Fail output
, also can be used as the
port of CH2 Output of optional dual-channel waveform generator
. The output type can
be set on the menu (Utility menu
→
Output
→
Output).
11.
Out 1
port: CH1 Output of optional dual-channel waveform generator.
