Quick Guide
1
Quick Guide
Front Panel
8
2
5
3
7
4
6
1
1.
Display area
2.
Control (button and knob) area
3.
Probe Compensation: Measurement signal (5V/1kHz) output.
4.
EXT Trigger Input
5.
Signal Input Channel
6.
Copy button: You can save the waveform by just pressing this button in any user
interface.
7.
USB Host port:
It is used to transfer data when external USB equipment connects to
the oscilloscope regarded as "host device".
For example: Saving the waveform to USB
flash disk needs to use this port.
8.
Power on/off
Backlight of this button:
Red light:
The oscilloscope is turned off (connects with AC Power);
Green light:
The oscilloscope is turned on.
