10
shown in figure 4.1
(5)
Observe the waveform compensation and adjust the LF compensation controls as
shown in figure 4-2
Good Compensate Over Compensate Under Compensate
Fig 4-1
LF COMP
Fig 4-2
4.2 MEASUREMENT
4.2.1P-P Voltage Measurements
Step :
(1) Input signal to INPUT [19] terminal.
(2)
Setup VOLTS/DIV and observe waveform, set waveform display on the screen within
5 divisions, and turn VAR clockwise to the calibration position.
(3)
Adjust level to make waveform steady.
(4)
Adjust sweep controls to show at least one cycle of the waveform is on the screen.
Summary of Contents for AO-610
Page 1: ...Voltcraft AO 610 10MHZ OSCILLOSCOPE USER S MANUAL ...
Page 16: ...15 ...
