5.4 Operation
Consult an expert when in doubt about the operation, safety or connection of the appliance.
If it is no longer possible to operate the product safely, take it out of operation and protect
it from any accidental use. DO NOT attempt to repair the product yourself. Safe operation
can no longer be guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.
5.5 Li-ion battery
The rechargeable battery is permanently built into the product and cannot be replaced.
Never damage the rechargeable battery. Damaging the casing of the rechargeable battery
might cause an explosion or a fire!
Never short-circuit the contacts of the rechargeable battery. Do not throw the battery or the
product into fire. There is a danger of fire and explosion!
Charge the rechargeable battery regularly, even if you do are not using the product. Due
to the rechargeable battery technology being used, you do not need to discharge the re-
chargeable battery first.
Never charge the rechargeable battery of the product unattended.
When charging, place the product on a surface that is not heat-sensitive. It is normal that a
certain amount of heat is generated during charging.
5.6 Connected devices
Also observe the safety and operating instructions of any other devices which are
connected to the product.
5.7 Product
Risk of explosion or fire! Do not leave the product in a hot vehicle. Avoid excessive heat.
Refer to “Technical data”.
Do not short-circuit the input and outputs.
Never leave the product unattended during use.
6 Product overview
1 2
3
4
5
1 Power button
2 LED indicators
3
Output 1
: USB-A output (QC 3.0)
4
Output 2
:
USB-A output (QC 3.0)
5
TYPE-C IN/OUT:
USB-C™ input/output (QC 3.0 & PD 3.0)
7 Operation
7.1 Checking the remaining power
The LED indicators show you the power remaining in the power bank.
Disconnect the charging cable and/or any peripherals then press the power button to il-
luminate the indicators.
Each light indicates 25% of the capacity.
Number of LEDs ON
Remaining power
100%
75%
50%
25%
7.2 Charging the power bank
Important:
– Do not use a USB 2.0 / 3.0 port to charge the internal battery, as the current supplied
by these ports may not be sufficient.
– Fully recharge your power bank at least once every three months.
1. Connect the supplied USB-C™ cable to the USB-C™ port of the power bank.
2. Connect the other end of the cable to a suitable power supply.
Æ
The LED indicators will blink to indicate the charging status.
Æ
When all 4 LEDs light up steadily, the power bank is fully charged.
3. Disconnect the charging cable when charging has completed.
Operating Instructions
VC PB PD60W Power Bank 26800 mAh
Item No. 2588045
1 Intended use
The product is a power bank with USB ports. Use it to charge devices (e.g. tablets, smart-
phones, laptops).
Contact with moisture must be avoided under all circumstances.
If you use the product for purposes other than those described, the product may be damaged.
Improper use can result in short circuits, fires, electric shocks or other hazards.
The product complies with the statutory national and European requirements. For safety and
approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product
available to third parties only together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights
reserved.
2 Delivery content
Power bank
USB-C™ to USB-C™ charging cable (approx. 30 cm)
Operating instructions
3 Latest product information
Download the latest product information at
www.conrad.com/downloads
or scan the QR code
shown. Follow the instructions on the website.
4 Description of symbols
The following symbols are on the product/appliance or are used in the text:
The symbol warns of hazards that can lead to personal injury.
Qualcomm
®
Quick Charge
TM
3.0
5 Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting per-
sonal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
5.1 General information
The device is not a toy. Keep it out of the reach of children and pets.
Do not leave packaging material lying around carelessly. This may become dangerous
playing material for children.
If you have questions which remain unanswered by these operating instructions, contact
our technical support service or other technical personnel.
Maintenance, modifications and repairs must only be completed by a technician or an au
-
thorised repair centre.
5.2 Handling
Please handle the product carefully. Jolts, impacts or a fall even from a low height can
damage the product.
5.3 Operating environment
Do not place the product under any mechanical stress.
Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam
and solvents.
Protect the product from high humidity and moisture.
Protect the product from direct sunlight.
Do not switch the product on after it has been taken from a cold to a warm environment.
The condensation that forms might destroy the product. Allow the product to reach room
temperature before you use it.
