79
12.8 SELECT function
Some measurement modes have additional sub-modes. The sub-modes are marked
in grey around the control dial. To switch to a sub-mode, press the “SELECT” button.
Press the button again to switch to the next sub-mode.
12.9 SETUP function
The setup menu serves to configure various system parameters according to your
needs. To select the setup menu, press the “SETUP” button. Use the function but-
tons “F1” and “F2” to navigate through the menu and select menu items.
Use the two arrow buttons “<” and “>” to select the fields you wish to set.
Use the function buttons “F3” and “F4” to change values. Press the “SETUP” button
again to exit the setup menu.
Brightness
Display backlight
Sound
Button tones
Color Mode
Display theme (light/dark)
Auto Power Off
Automatic shut-off (Always ON = disabled)
Display
Display backlight switch-off time
Key Light
Position illumination on the control dial
Torch Time
Torch switch-off time (Always ON = disabled).
Cont Threshold
Acoustic continuity test threshold
(1 - 1000 Ω)
Set Time
System time setting (hours:minutes:seconds)
Set Date
Date setting
Date Format
Date Format (DD = day, MM = month, YY = year)
Compare Type
Comparison type (INNER = within tolerance, OUTER =
outside tolerance)
Compare Min
Lower tolerance limit
Compare Max
Upper tolerance limit
Record Num
Number of stored values (1 - 10000 values)
Record Rate
Storage interval (1 - 10000 s)
Factory Reset
Restore factory settings
