b) Starting the measurement process
• Start by setting the time period, see Chapter
10. a). In the example to the right, a time period
of 3 days has been set.
•
When no indicator is flashing, start the meas
-
urement process by briefly pressing the
button (4).
• The display switches back to the measured
values. During the automatic measurement
process, “PERIOD” flashes on the display, see
the arrow in the figure to the right.
• You can, as usual, use the
button (6) or
button (7) for more in-
formation.
c) Starting the measurement process again with the same
time period
To start another measurement process with the same, previously set time period,
proceed as follows:
•
Briefly press the
button (4). “PERIOD” and the currently set time period
for the measurement process appear on the display.
•
Briefly press the
button (3), the day flashes.
•
Briefly press the
button (3), the hours flash.
•
Briefly press the
button (3), setup mode is ended, no indicator flashes.
•
Start the measurement process by briefly pressing the
button (4) (see
also Chapter 10. b).
63
