41
8. Display Indications and Symbols
The following symbols and information are present at the device or in the display.
1 True root mean square
2 Symbol for the diode test
3 Symbol for the acoustic continuity tester
4 Symbol for nano (exp.-9)
5 Symbol for milli (exp.-3)
6 Symbol for micro (exp.-6)
7 Farad (unit of electric capacity)
8 Volt (unit of electric voltage)
9 Ampere (unit of electric current)
10 Symbol for mega (exp.6)
11 Symbol for kilo (exp.3)
12 Ohm (unit of electric resistance)
13 Hertz (unit of frequency)
14 Display of the pulse duration ratio
15 Measured value display
16 Automatic deactivation is activated
17 Bar chart, analogue bar display for the digital value
18 Hold function is active
19 Automatic lighting for display is active
20 Minimum value memory
21 Maximum value memory
22 Delta symbol for relative value measuring (= reference value measuring)
23 Automatic measurement range selection is active
24 Battery change display
25 Warning symbol for dangerous voltage or with warning sound when the measured value is exceeded
26 Symbol for direct current ( )
27 Polarity indication for current flow direction (minus pole)
28 Symbol for alternating current ( )
29 Symbol for low impedance
Summary of Contents for 1500206
Page 63: ...63 ...
