REPLACING THE FILTERS
•
The filters should be replaced twice a year or more often depending on the use of the
vacuum cleaner and the dust penetration, which is visible by the discolouring of the filter.
•
Disconnect the electrical power cord from the power outlet prior to cleaning the filters.
•
Always operate the vacuum cleaner with the filters installed to avoid reduction of suction
and penetration of dust to the motor.
CLEANING THE MOTOR FILTER
If necessary, the motor filter can be washed or replaced at least twice a year or if clogged,
depending on use.
1. Remove the dust container by using the open button on the handle.
2. Remove the filter from its place.
3. Rinse the filter under tap water and leave it to dry completely (over a
period of 24 hours).
2. Put the filter back into its place.
1. Insert the dust container back into the cleaner by pressing it down until it clicks.
For enquiries on spare parts or for your closest service centre to obtain spare parts, please
contact our customer service help line on 1300 365 305(AUS), 0508 730 730(NZ)
REPLACING THE EXHAUST MICROFILTER
The exhaust microfilter should be replaced at least twice a year or if clogged.
4. Open the filter front.
5. Remove the exhaust filter with grill.
6. Take the filter out of the filter grill and insert a new exhaust filter.
5. Put the filter with the grill back into the cleaner.
4. Close the filter grill.
7
1.
2.
3.
4.
5.
6.
38215 Volta U4015F Vortex IFU_V3.indd 8
26/08/10 1:43 PM
