background image

INSTRUCTIONS FOR USE

4.

Hard floor/parquetry:

 use the hard floor nozzle to 

avoid scratching.

For the perfect care of your carpets: 

Use the Turbo nozzle. The rotary motion of the 
its brush gently loosens where the dirt has been 
trodden in on the short pile carpets. It also removes 
stubborn fluff and pet hairs.

Removing the contents of the dust 
container.

Never operate the cleaner without the dust 
container installed.
The dust container must be emptied if the window 
of the electronic filter indicator is illuminated when 
the cleaner is operating at maximum power and the 
nozzle is raised form the floor.

1. Remove the dust container from the cleaner by 

pushing the opening button on both sides.

2. Remove the contents of the dust container by 

pushing the orange coloured opening button.

3. Close the dust container lid until it clicks.

4. Put the dust container back into the cleaner.

Cleaning the filters

Filters should be replaced at least twice a year or 
when they become visibly soiled.
Always operate the cleaner with filters installed to 
avoid reduced suction and the damage of the motor.
Always operate the cleaner with the cartridge 
installed. Disconnect from electrical outlet before 
changing the filters.

Cleaning the cartridge filter 

Remove the dust container from the cleaner by 
pushing the opening button on both sides

Rotate the dust container cover counter – clockwise  
and pull it out from the dust container. 

Remove the cartridge filter by turning it 
counter-clockwise and pull it out from the dust 
container cover.

Remove the cartridge filter form the cartridge filter 
plate by turning it clockwise.

Rinse it under tap water.
Air dry for approximately 24 hours, to ensure it 
is completely dry before re-using.  Avoid direct 
sunlight and extreme drying circumstances (hair 
dryer, etc). If you wish to use your appliance while 
the cartridge is drying, you may use the extra 
cartridge filter inserted in the packaging box.

Summary of Contents for U7440









Reviews: