VOLTA Diamant CE, Operating Instructions Manual

Page: 3 / 13

Making the Vacuum Cleaner Ready for
Use
The accessories can be connected by pressing
together and turning, and separated by pulling and
turning:
Connect Together the Suction Hose and
Suction Tube.
Firmly connect the suction tube handle to the suc-
tion tube.
Connect the Suction Tubes Together
(depending on model)
Connect the two tubes together.
Adjust the Telescopic Tube
(depending on model)
Push down the button on the tube and adjust the
tube to the desired working position.
Connect the Suction Hose
Plug the suction hose connector into the suction
inlet. The connector clips into place and is free to
rotate.
Press the release button and pull out the connector
in order to remove the suction hose.
Mains Connection/Cable Rewind
The mains cable is stored in the cable compartment
Pull out the cable and plug into a mains socket.
Unplug from the mains socket. Press the foot
button, the cable is automatically rewound after
vacuuming.
Using the Nozzles
The nozzles are connected to the suction tube by
pressing and turning, and removed by pulling and
turning.
Using the VARIO 500 Floor Nozzle
For daily care of carpets and hard floors. The floor
nozzle is manually adjustable. Extended brushes for
smooth floors, retracted brushes for carpets.
See additional accessories for special floor nozzles.
Crevice and Upholstery Nozzle Stored in the
Appliance
To meet individual cleaning requirements two ac-
cessories are included with the appliance, these are
stored in an integrated accessories compartment.
Open the lid of the accessories compartment up-
wards at the recessed handle.
The nozzles can be fitted to both the suction
tube and the suction hose handle as required.
Crevice Nozzle
For vacuuming crevices, gaps and corners.
Upholstery Nozzle
For vacuum cleaning all upholstered furniture, mat-
tresses, etc.
The thread lifting strips on the nozzle even pick up
thread and lint.