w w w . v o l t l i g h t i n g . c o m
INSTALLATION INSTRUCTIONS
- 4 -
Install Fixture to Stake
2
VOLT
®
RGBW Salty Dog Integrated LED Brass In-Grade Light (Bronze)
VWL-7124-BBZ
Install Stake
1
Determine the desired location
for mounting the fixture.
Hammer the stake into the
ground until flange of stake
is flush to grade. To avoid
damage to the stake, place a
board on top of the stake while
hammering.
NOTE: If the ground is hard and
the stake is difficult to install,
make a crosscut in the ground
using a flat shovel.
Board
Stake
Soil
Ground
Clear away an area in the
ground for the stake. Lay
the luminaire pigtail into
the cleared area and screw
the fixture onto the stake.
Tighten until snug.
Ground
Fixture
Pigtail
Soil
Stake
