Install Luminaire to Stake
5
Clear away an area in the ground at
the wireway slot on top of the stake.
Lay the luminaire pigtail into the
wireway slot and screw the stem onto
the stake.
If the assembly does not look
straight, adjust by pushing or pulling
on the stake only.
Use a bubble level against the side
of the stem to ensure the stem is
perpendicular to the ground.
Pigtail
Stem
Stake
Wireway Slot
[email protected] • 813.978.3700
Wire Connections
6
Strip both of the leads from the luminaire pigtail. Using two wire
connectors (sold separately), connect the leads from the luminaire to
the main low voltage supply cable leads.
Luminaire Wires
Main Low Voltage
Supply Cable
Wire
Connectors
