background image

VOLT

®

 Guardsman Post Top Light

VPL-1011-4-BBZ

Important: Please Read Before Installation

INSTALLATION INSTRUCTIONS

This fixture is intended for installation in accordance with local codes and 

the National Electric Code (NEC). Failure to adhere to these codes and 

instructions may result in serious injury, property damage and void the 

warranty.

These instructions do not intend to cover all variations in installation, 

operation maintenance or mounting situations. 

     

1.  Make sure that the power is turned OFF before installing or servicing 

this fixture. 

2.  Warning: this fixture is not intended to be installed within 10 feet [3 

meters] of a pool, spa or fountain.

3.  This fixture is intended to be used only with a power supply 

(transformer) rated maximum of 50 watts (25 AMPS) at 12 volts.

4.  Underground Low Energy Cable must not be buried over 6” (15.2 cm) 

in order to connect to the main low voltage cable. 

5.  Wiring connections must be made with UL listed wire connectors that 

are suitable for outdoor use.

6.  Position the wire connector so that it is located within 6 inches (15.2 

cm) from a building structure, a luminaire, or fitting.

!

w w w . v o l t l i g h t i n g . c o m

Important Safety Instructions

LIGHTED LAMP IS HOT!

WARNING – TO REDUCE THE RISK OF FIRE OR INJURY TO PERSONS.

1.  Turn off/unplug and allow to cool before reducing lamp.
2.  Lamp gets HOT quickly!
3.  Do not touch the hot lens, guard or cowl.
4.  Keep lamp away from materials that may burn. 
5.  Do not touch lamp at any time. 
6.  Use a soft cloth. 
7.  Oil from skin may damage lamp.
8.  Do not operate the fixture with a damaged or missing lens or shield.

!

- 2 -

Summary of Contents for VPL-1011-4-BBZ









Reviews: