INSTALLATION INSTRUCTIONS
w w w . v o l t l i g h t i n g . c o m
[email protected] • 813.978.3700
VOLT
®
6” Undercover Hardscape Light
VHS-668-4-BBZ
Strip both leads from the
luminaire pigtail. Using two wire
connectors (sold separately),
connect the leads from the
luminaire to the main low voltage
supply cable leads.
Luminaire
Wire Connector
Main Low Voltage Supply Cable
Install/Replace Bulb
Loosen the screws on the lens, remove the lens to expose the bulb
and replace it with correct wattage and type marked on the fixture
label. Then reinstall the lens to the fixture.
IMPORTANT: Bulbs must be protected from moisture and dust at all
times. Always reinstall the lens when removed.
Pigtail
Install Luminaire
4
Luminaire
Lock Screw
Wall Anchors
Place the lens back onto
the luminaire and secure
with the removed screws
on Step 1.
Attach the luminaire onto your
desired location and secure with the
lock screws.
Note: Wall anchors are required for
certain installation conditions (brick
wall, concrete call, etc.). Place a
mark on the wall for the wall anchors
using the holes on the base. Remove
the base and drill proper holes on
the wall and then insert the wall
anchors.
Install Lens
3
Luminaire
Lens
Screw
Wire Connections
5
- 4 -
- 5 -
