[email protected] • 813.978.3700
- 5 -
Install Lampbody
3
Remove the hex nuts and washers
from wall anchor bolts. Attach the
yoke mount of the fixture to the wall
anchor bolts and secure it in place
with the previously removed washers
and hex nuts. Tighten until snug.
Fixture
Bolt
Wire Connections
4
Lampbody
Wiring Terminal
Main Supply Cable
Yoke
Hex Nut
Washer
Wall
Supply Wire
from Lampbody
Allow enough wire from the lampbody for adjustment purposes.
Connect wires from the fixture into the wiring terminal. The white wire
goes to the “Neutral” terminal;the black wire goes to the “Live” terminal;
and the green wire goes to the “Ground” terminal. Fix them in place with
the connector screws.
Summary of Contents for VFL-4001-LI-ABZ
Page 7: ... 7 ...