background image

VOLT

®

 Top Dog Scotty Spotlight

VAL-180 Series

Important: Please Read Before Installation

IMPORTANT SAFETY INFORMATION

INSTALLATION INSTRUCTIONS

!

!

w w w . v o l t l i g h t i n g . c o m

This luminaire is intended for installation in accordance with local codes 

and the National Electric Code (NEC). Failure to adhere to these codes 

and instructions may result in serious injury, property damage and void 

the warranty.

These instructions do not intend to cover all variations in installation, 

operation maintenance or mounting situations. 

1.  Make sure the power is turned OFF before installing or servicing this 

luminaire. 

2.  WARNING: risk of electrical shock. Install all luminaires 10 feet (3.05M) or 

more from pool, spa or fountain.

3.  This luminaire is intended to be used only with a power supply (transformer) 

rated maximum of 300 watts (25 AMPS) at 15 volts.

4.  Wiring connections must be made with UL Listed wire connectors that are 

suitable for outdoor use.

5.  Position the low voltage wire and wire connector so that it is located within 

6 inches (15.2 cm) from a building structure, a luminaire or fitting.

6.  The main low voltage cable is intended for shallow burial - less than 6 

inches (152 mm).

7.  If additional lengths of low voltage cable are required, please contact www.

voltlighting.com or call 1-813-978-3700.

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS

Lighted lamp is HOT!

WARNING – To reduce the risk of FIRE OR INJURY TO PERSONS.

1.  Turn off/unplug and allow to cool before replacing lamp.
2.  Lamp gets HOT quickly! Contact only switch/plug when turning on.
3.  Do not touch the hot lens, guard or enclosure.
4.  Keep lamp away from materials that may burn. 
5.  Do not touch lamp at any time. Use a soft cloth. Oil from skin may damage 

lamp.

6.  Do not operate the luminaire fitting with a missing or damaged shield.

SAVE THESE INSTRUCTIONS

- 2 -

Summary of Contents for VAL-180 Series









Reviews: