[email protected] • 813.978.3700
Install/Replace Lamp
Remove the glare guard and the shield to expose the lamp and replace it
with correct wattage and type marked on fixture label. And then reinstall
the shield and glare guard to the fixture.
IMPORTANT: Halogen lamps must be protected from moisture and dust at
all times. Always re-install shield when moved.
Wire Connections
6
Strip two leads from fixture pigtail. Using two wire connectors, sold
separately, connect leads from fixture to main low voltage supply cable
lead.
Pigtail
Main Supply Cable
Wire Connectors
Clear away area in ground at wireway
slot in top of stake. Lay luminaire
pigtail into wireway slots and screw
fixture into stake. Tighten until snug.
Install Fixture to Stake
5
Fixture
Pigtail
Wireway Slot
Stake
