INSTALLATION INSTRUCTIONS
w w w . v o l t l i g h t i n g . c o m
VOLT
®
All-Star™ Spotlights
VAL-2000 series
Install MR16 Lamp
Install Glare Guard and Shield to Fixture
2
3
Insert lamp with correct wattage and
type as marked on fixture label.
CAUTION: Do not exceed maximum
wattage marked on luminaire label.
NOTE: DO NOT touch lamp with bare
hands. Use soft cloth to handle lamp.
Screw the shield back onto the fixture.
Pass the glare guard over the shield
and secure with lock screw. Tighten
until snug.
Socket
MR16 Lamp
(Sold Separately)
Install Stake
4
Board
Stake (Sold
Separately)
Soil
Ground
Determine desired location for mounting
fixture. Hammer stake into ground until
flange of stake is flush to grade. To avoid
damage to stake, place a board on top of
stake while hammering.
NOTE: If ground is hard and stake is
difficult to install, make a crosscut in
ground using a flat shovel.
Glare Guard
Lock Screw
Shield
Fixture
