Install Luminaire to Stake
4
Clear away area in ground at wireway
slot in top of stake. Lay luminaire pig
-
tail into wireway slot and screw stem
into stake.
If assembly does not look straight,
adjust by pushing or pulling on stake
only.
Use bubble level against side of stem
to ensure that stem is perpendicular
to ground.
Pigtail
Rod
Stake
Wireway Slot
[email protected] • 813.978.3700
Wire Connections
5
Strip two leads from luminaire pigtail. Using two wire connectors, not
provided, connect leads from luminaire to main low voltage supply cable
lead.
Luminaire Wires
Main Low Voltage
Supply Cable
Wire Connectors
Install/Replace Lamp
Unscrew lock balls and remove tempered glass to expose lamp and replace it
with correct wattage and type marked on luminaire label. And then reinstall
tempered glass and secure with lock balls.
IMPORTANT: Halogen lamps must be protected from moisture and dust at
all times. Always re-install shade and lens when moved.
