
12
Check the location where inverter is to be installed to ensure the following.
●The ambient temperature is within the operation range ( -20°C to +60°C -4°F to +140°F,).
●The altitude is less than 2,000 m.
● Not prone to be damaged by sea water.
● Not close to corrosive gas or liquid (for example, locations where chemicals are processed or lots of poultry is fed).
● Not exposed to direct sunlight.
● Not prone to be flooded snowed in.
●Ensure good ventilation and low humidity.
● Not exposed to steam, vapor, or water.
●Not exposed to direct cool air.
●Not close to television antenna or antenna cae.
●Inverter needs to be at least 30 cm (see table 2) clearance. If this is not observed, inverter is likely to malfunction
high temperature inside the inverter, will not cover any damage due to this condition .
Position
Min. clearance
Side
30cm
Top
30cm
Bottom
30cm
Front
10cm
Table 2 Minimum clearance needed
6.3 Preparation
Following tools are needed for installation.
Installation Tools
I
nstallation Tools: Crimping tool, Plier, Electrical drill and Screwdrivers & adjustable spanner.
6.4 Installation Steps