Volt-E DMTC22KW, Installation And Use Manual, Page: 42 / 52

Model DMTC22KW
Domestic Charger AC 22kW
37
→
Disconnect the network cable - Disconnect the RJ45 network cable from the
Android controller;
→
Connect to your network - Connect the network cable you want to the Ethernet
terminal of the Android controller;
→
Android secret menu - is described in section 6.3. of this manual, how to open the
Android secret menu, to access its internal settings;
→
Authenticate yourself - Put the code by default, or the code you defined to open
the menus;
→ Android Settings
– Choose the Option
Android Settings
;
→ Menu Wireless & Networks – Choose the menu , Wireless & Networks;
→ Enable Wi-Fi
– Ensures that the Wi-Fi network interface is OFF;
→
Restart the equipment – Physically restart the equipment to ensure that it starts up
correctly with the ChargeMonitorApplication application.
6.7. Conectividade Ethernet Connectivity Wi-Fi
When necessary, it is possible to connect the equipment to a local network through a
wireless network. The steps necessary to establish Wi-Fi connectivity are described
below.
→ Secret Menu Android – is described in section 6.3. of this manual, how to open the
Android secret menu, to access its internal settings.