Modular Induction Dry Well Drop-ins Operator’s Manual
5
OPERATION (CONTINUED)
Turn On/Off Power to an Induction Capsule(s)
Set the Temperature or Power Level
Use the control panel to select settings for each induction capsule.
Press
to switch between temperature and power level modes or change the temperature control to ºF or ºC.
Note:
This
equipment
monitors
the
temperature
of
the
induction-ready
pan
and
automatically
adjusts
the
output
to
maintain
the
user
controlled
set point. Temperatures displayed may vary from actual food temperatures depending on the type of food and stirring frequency. For best
results adjust the settings as needed to achieve the desired temperature of each menu item. Some foods may require a higher setting to
hold at the desired temperature.
Note: The efficient induction technology of this drop-in heats the bottom of the pan. Heat will radiate up the pan to warm the sides, but they will
not be as hot as the bottom. This is normal operation.
One pan / same temperature or power level for both induction capsules
When using a single full-size pan, the sync function enables both induction capsules to operate as one.
Two pans / different temperature or power level for each induction capsule
Each induction capsule can be individually turned on and off, and have different heat settings. The heat mode, temperature or power will be
the same for both induction capsules.
Turn on/off a single induction capsule
1. Press
to select induction capsule.
2. Press
.
Turn on/off both induction capsules at once
1. Press
.
2. Press
.
1. Press
to sync the induction capsules. The border around the button will turn blue to indicate the induction capsules
are in sync mode. In sync mode, settings apply to both induction capsules.
2. Press
or
to select a temperature or power level. The setting for both induction capsules will change.
1. Press
to select a induction capsule. The border around the button will turn blue to indicate the induction
capsule is selected.
2. Press
or
to set a temperature or power level.
3. Press the other
to select the other induction capsule. The border around the button will turn blue to indicate the
induction capsule is selected.
4. Press
or
to set a temperature or power level.
Sync
Fnc
Sync
Back
Front
Summary of Contents for FC-6IH-01120
Page 10: ...10 Modular Induction Dry Well Drop ins Operator s Manual This page intentionally left blank...
Page 11: ...Modular Induction Dry Well Drop ins Operator s Manual 11 This page intentionally left blank...
Page 22: ...10 Manuel d utilisation du module encastrable sec induction Page vierge...
Page 23: ...Manuel d utilisation du module encastrable sec induction 11 Page vierge...
