Installation Instructions
©
2017 The Vollrath Company L.L.C.
Part No. 350719-1 ml
3/30/17
Spring Loaded In-Counter Cup Dispenser
Thank you for purchasing this Vollrath equipment. Before operating the
equipment, read and familiarize yourself with the following operating
and safety instructions. SAVE THESE INSTRUCTIONS FOR FUTURE
REFERENCE. Save the original box and packaging. Use this packaging
to ship the equipment if repairs are needed.
SAFETY PRECAUTIONS
To ensure safe operation, read the following statements and understand
their meaning. This manual contains safety precautions which are
explained below. Please read carefully.
Warning is used to indicate the presence of a hazard that will or can
cause severe personal injury or death.
Caution is used to indicate the presence of a hazard that will or can
cause minor or major personal injury if the caution is ignored.
NOTICE: Notice is used to note information that is important but not
hazard-related.
TOOLS YOU WILL NEED
• #2 Phillips Screwdriver
• Drill
•
¹⁄₈
" Drill Bit (For #29 Pilot Hole)
• Sabre Saw or Hand Router
• 3 #8 x 1.00" Pan Head Phillips Screws (included)
CHOOSE THE CORRECT SPRING
The dispenser includes two springs for different applications. See the
chart below. The lighter weight dispenser is factory installed. See
“Change Default Spring (Optional)” on page 3.
INSTALLATION
Mount the Dispenser
1. Cut the appropriate diameter opening in the mounting surface.
2. Lift the bezel to remove it from the tube to revel the mounting holes
and the components that can be adjusted to accommodate different
cup diameters.
WARNING
CAUTION
Mounting
Dispensing
Use This Spring
Vertical
Paper or Plastic
Heavier Weight
Foam
Lighter Weight
Horizontal
Paper, Plastic or Foam
Lighter Weight
Angled
Paper or Plastic
Heavier Weight
Foam
Lighter Weight
Item No.
For Cup Rim Diameter
Cutout Diameter
CADJ-1
2
¹⁄₂
– 3
¹⁄₂
" (6.4 – 8.9 cm)
4 (10.2)
CADJ-2
3 – 3
⁷⁄₈
"(7.6 – 9.8 cm)
4
¹⁄₂
(11.4)
CADJ-3
3 – 4
⁵⁄₈
" (7.6 – 11.7 cm)
5
¹⁄₄
(13.3)
CADJ-4
4
¹⁄₂
– 5
¹⁄₄
" (11.4 – 13.3 cm)
5
³⁄₄
(14.6)
