6
Mirage
®
Buffet Induction Warmers Operator’s Manual
TROUBLESHOOTING
Problem
Might be Caused By
Course of Action
The equipment turned off after 10
minutes.
There is not a serving vessel on the
induction warmer or the vessel is not
induction ready. The induction warmer
turned off. This is normal.
Make sure the serving vessel is induction ready. See the FUNCTION
AND PURPOSE section of this manual.
The equipment is on, but not
heating.
The serving vessel may be too small or
may not be induction ready.
Make sure the serving vessel is induction ready. See the FUNCTION
AND PURPOSE section of this manual.
The Power Level LEDs are flashing. The overheat-protection feature may
have activated.
Remove the serving vessel. Let the equipment cool for
approximately 15 minutes. When the overheat condition has
cleared, the equipment will return to normal function.
The equipment suddenly stopped
working.
The equipment may be too close to an
external heat source or the air intake
may be restricted.
Relocate the equipment away from any external heat source. Clear
any obstructions to the air intake.
