To Remove:
Rear Lint Screen
follow steps 1 - 5
ActivePure® cell
follow steps 1 - 9
1. Unplug unit.
2. Remove
the back
cover
screw.
3. Remove back
cover. Press
the sides
to unlatch,
then tilt the
bottom out
to remove.
4. Remove
two (2)
thumbscrews
securing the
top of the lint
screen.
5. Remove
the lint
screen
by pulling
back the
top, then
lifting up
and out.
WARNING: Do not operate FreshAir Everest without
the rear lint screen and back cover properly installed.
9. Remove
two (2)
thumbscrews.
10. Remove the
ActivePure®
cell(s) from
the unit.
6. Unlock the
ActivePure®
cell connector
by pressing
on the
connector’s
locking tabs.
7. Pull the
connector
straight out
to unplug.
8
ActivePure® cells must be
replaced every twelve (12)
months if used continuously, or
every two (2) years if used less
than 12 hours per day, even if
the UV lamp is still operating.
8. Unlock and
remove the
connector
for cell 2 (if
installed).
1
2
CAUTION: Unplug the unit before performing any
maintenance procedures.
REMOVING THE REAR LINT SCREEN
(FOLLOW STEPS 1 - 5)
REMOVING THE ACTIVEPURE® CELL
(FOLLOW STEPS 1 - 9)
NOTE: Use genuine Vollara
replacement parts only. Parts
from anyone other than Vollara
may damage your unit and void
your warranty.