– Remove auxiliary air heater -3- from guide -A-.
Type plate
Note
♦
Date of first use is entered on lower part of type plate.
♦
The heat exchanger can be used for 10 years but must be
replaced once this date has elapsed.
Removing without bracket
– Separate electrical 10-pin connector - T10ba- -1- from auxili‐
ary air heater beneath front right seat.
– Remove right underbody cladding ⇒ General body repairs,
exterior; Rep. gr. 66 ; Underbody cladding; Assembly over‐
view - underbody cladding .
– Guide wiring harnesses through opening in floor.
CAUTION
The fuel system is pressurised.
Risk of injury caused by fuel spray.
– Wear safety goggles.
– Wear protective gloves.
– To release pressure, wrap a clean cloth around the connec‐
tion, and carefully loosen the connection.
– Separate fuel line -arrow- from auxiliary air heater.
– Seal fuel line.
– Remove exhaust system
– Loosen clamp for air intake silencer at auxiliary air heater.
– Detach cable ties at connecting elements -1- of air ducts.
Transporter 2020 ➤
Auxiliary heater - Edition 04.2020
38
Rep. gr.82 - Supplementary heating
