background image

The current speed is stored as the maximum speed.

Setting the speed

You can adjust the stored speed:

Steering wheel variant 1:

Press the 

 button.

Press the 

 button.

Press the   button.

Press the   button.

Steering wheel variant 2:

Gently press the   button.

Lightly press the   button.

Strongly press the   button or

swipe over the button from bottom to top.

Strongly press the   button or

swipe over the button from top to bottom.

Press and hold the corresponding button to continu-
ously change the stored speed.

Interrupting control

— Press the button 

 or 

.

The speed remains stored in the memory.

Resuming control

— Press the 

 button.

The speed limiter is activated again as soon as the
current speed is lower than the stored speed.

Switching off

— Press and hold the 

 button.

The speed limiter is switched off and the speed re-
mains stored (also after the ignition is switched off).

Switching to the cruise control system (CCS) or
Adaptive Cruise Control (ACC)

1.

Press the 

 button.

2.

Select the desired system on the instrument
cluster display.

The speed limiter is switched off.

Depending on equipment, the 

 button is ei-

ther on the multifunction steering wheel or on

the turn signal lever.

+ 1 km/h 

(1 mph)

:

- 1 km/h 

(1 mph)

:

+ 10 km/h 

(5 mph)

:

- 10 km/h 

(5 mph)

:

+ 1 km/h 

(1 mph)

:

- 1 km/h 

(1 mph)

:

+ 10 km/h 

(5 mph)

:

- 10 km/h 

(5 mph)

:

Troubleshooting

 Please refer to 

 at the start of the chapter on

page 157.

System control is interrupted automatically.

— Malfunction. Switch off the speed limiter and go

to a qualified workshop.

For safety reasons, the speed limiter switches itself
off completely only when you release the accelera-
tor once or switch off the system manually.

Adaptive Cruise Control (ACC)

 Introduction to the topic

The Adaptive Cruise Control (ACC) maintains
a constant speed that you have set. If the vehi-
cle approaches a vehicle in front, the ACC auto-
matically adapts the speed so that a distance
you have selected is maintained.

Does the vehicle have ACC?

The vehicle is equipped with ACC if you can adjust
settings for ACC in the Assist systems menu in the
Infotainment system.

Speed range

ACC is active in the speed range between around
30 km/h (20 mph) and around 210 km/h (130 mph),
or up to around 150 km/h (95 mph) in the USA. This
speed range may differ in certain markets.

Driving with ACC

You can override the active ACC system at any time.
Cruise control will be stopped if you brake. If you ac-
celerate, cruise control will be interrupted while you
are accelerating and then resumed.

The intervention by the ACC system is less dynamic
when towing a trailer.

Brake request

If automatic deceleration by the ACC system
is not sufficient, the ACC system will request
you to brake additionally by a corresponding
message on the instrument cluster. In addi-
tion, the red warning lamp lights up and an
acoustic warning is given. Brake immediately!

158

Driver assist systems

Summary of Contents for Passat 2020
























Reviews: