Pro
te
cte
d b
y c
op
yri
gh
t. C
op
yi
ng
fo
r p
riv
at
e
o
r c
o
m
m
e
rc
ia
l p
u
rp
o
s
e
s
, i
n
p
a
rt
o
r i
n
w
h
o
le
, i
s
n
o
t p
e
rm
itt
ed
u
nl
es
s a
ut
ho
ris
ed
by
Vo
lksw
agen
AG. Volkswagen AG doe
s not
gua
ran
tee
or a
cc
ep
t a
ny
lia
b
ilit
y w
ith
re
s
p
e
c
t t
o
th
e
c
o
rr
e
c
tn
e
s
s
o
f
in
fo
rm
a
tio
n
in
th
is
d
oc
um
en
t.
C
op
yrig
ht b
y V
olk
sw
age
n A
G.
– Carefully pull selector mechanism with Bowden cable out of
the centre tunnel. Ensure that the cord remains accessible
from the engine compartment after being pulled by the Bow‐
den cable.
– Remove cord from Bowden cable.
Installing
Install in reverse order of removal, observing the following:
Note
♦
A second mechanic is needed to guide Bowden cable from
passenger compartment into engine compartment.
♦
Do not grease selector lever cable.
Caution
Risk of damage to selector lever cable.
♦ Do not bend or kink selector lever cable.
– Attach Bowden cable to cord which was drawn into the pas‐
senger compartment during removal.
– Carefully guide selector mechanism with Bowden cable
through opening in centre tunnel.
– Have the second mechanic pull cord with Bowden cable
through tunnel from engine compartment until Bowden cable
can be attached to cable support bracket.
– Remove cord from Bowden cable.
– Secure selector mechanism to selector housing using 4 bolts.
– Install centre console ⇒ General body repairs, interior; Rep.
gr. 68 ; Centre console; Removing and installing centre con‐
sole .
– Install selector lever handle
⇒ page 48
.
– Adjust selector lever cable
⇒ page 60
.
– Check selector mechanism
⇒ page 59
.
– Install power and control electronics for electric drive -JX1- ⇒
Electrical system, hybrid vehicles; Rep. gr. 93 ; Power and
control electronics for electric drive -JX1- .
– Re-energise high-voltage system and carry out documenta‐
tion ⇒ Electrical system, hybrid vehicles; Rep. gr. 93 ; Re-
energising high-voltage system .
Specified torques
♦
⇒ “1.1 Assembly overview - selector mechanism”, page 45
1.6
Checking selector mechanism
Faults which can be detected electrically can be determined with
guided fault finding
. In the case of mechanical faults, skill
is required to localise and repair a faulty system or defective
»part«.
The engine must not be able to start in the selector lever positions
“R”, “D”, “S” or the Tiptronic position.
Jetta Hybrid 2013 ➤
7-speed dual clutch gearbox 0CG - Edition 08.2012
1. Selector mechanism
59
