b)
If no action after 60 seconds radio will switch to previous BT menu; 5 sec timeout, radio will exit the BT menu
display and reverts to LSM. If cell phone connects to radio during the 300 seconds of pairing time, radio will
display “CONNECTED” per 2 sec. The current audio output must remain without change. The BT icon must
remain visible in all menus to show that one cell phone is connected to radio.
c)
During PIN CODE display time, if cell phone connects to radio, radio will revert previous BT menu and display
cell phone name at center line (and it must be scrolled if name length is too large) and BT icon at left side of the
upper line and the indication “CONNECTED” per 2 sec; 5 sec timeout, radio will exit the BT menu display and
reverts to LSM. The current audio output must remain without change. The BT icon must remain visible in all
menus to show that one cell phone is connected to radio.
Case 2: “SAMSUNG E628” cell phone has been paired and connected to radio.
In phone menu, short press SK [
Prepared by Hector Gomez
HMI/ VWM DTEE / 52-222-2307414
DOC_HMI RADIO 2 DIN MIB-G LAM X1.8 revisada / 13/05/2011
Page 46 of 78
] button.
