• Connect the sync cable (BNC - BNC, BNC - 3 pin Mini DIN) on the 3D sync
output of the projector and the 3D Sync Connector on the SmartCrystal Pro™
Booster
• Plug the power cable and the Ethernet cable if necessary to SmartCrystal
Pro™ Booster
• Turn the switch to ON
Starting
•
After switching on and initialisation phase of SmartCrystal Pro ™ Booster which
may last a few seconds, the system recognizes the 3D synchronization and
starts automatically. You can optimize SmartCrystal Pro ™ Booster settings
directly on the touch screen. By briefly pressing one of the parameters, you
reveal the window of regulation of this parameter.
• The software interface is also accessible from a remote computer via an
Ethernet connection and / or a smartphone connected via WIFI to SmartCrystal
Pro ™ Booster. (See "9. USER INTERFACE")
Enjoy your brilliant 3D image !
