Fixing & Position
•
The SmartCrystal™ Pro Booster shall be placed on a stable surface with 4
screws.
•
The SmartCrystal ™ Pro Booster should be placed in front of the projector lens.
There is a "Projector Side" serigraphy on the product that will indicate the
correct direction.
•
The polarizer of the window should be perpendicular to the axis of the luminous
flux.
It is possible to fix the SmartCrystal Pro™ Booster to the ceiling. In this case you
must reverse the direction of the frame on its support. (See "7.4 Installing In
Ceiling" section)
Connections
Once started, no cable should be connected or disconnected from
SmartCrystal Pro ™ Booster.
For any change of the wiring configuration is essential to stop before the
SmartCrystal Pro ™ Booster using the ON / OFF button and wait for complete
shutdown of the unit by checking the LCD.
The SmartCrystal Booster Pro ™ is delivered with a WiFi dongle connected to
one of its USB ports.
For the proper functioning of the product, it is essential to never disconnect the
WiFi dongle.
